PPG Industries

PPG Industries

PPG Industries fabrica selladores Rapid Seal y sistemas de empacado de Semco. Selladores demuestran resistencia sin igual a disolventes orgánicos. Esos materiales These two-component manganese catalyzed polysulfide materials están diseñados por los tanques de combustible y otros sistemas de almacenimiento químico.

El empacado plástico de Semco facilita el reparto fiable de una gran variedad de materiales, incluyendo odd ratio, sistemas de dos componentes. El empacado Semkit es un kit completo de cartuchos plásticos de multiples componentes lo cual guarda, mezcla y aplica los adhesivos, selladores, encapsulantes y otros materiales y asegura una dosificación precisa de los materiales. Elimina tareas que requiere mucha mano de obra como medir y manejar materiales minimizar contacto con la piel. Hay dos tipos de Semkit, inyección y barrier.

Obtenga su copia de Instrucciones para mezclar selladores PRC
Obtenga instrucciones para mezclar selladores PRC >>

Artículos 1 a 10 de un total de 41

por página
Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Establecer Dirección Descendente
  1. PPG Semco 220238 F-Cap Red

    PPG Semco 220238 F-Cap Red

      

    PPG Semco 220238 Red Flange Cap is used to fit the flange end of cartridge to protect and prevent contamination during transportation and storage. Semco components are recommended for use with other Semco parts only. Más información
  2. PPG Semco 220245 Cap Tri Seal Red

    PPG Semco 220245 Cap Tri Seal Red

      

    PPG Semco 220245 Cap Tri Seal can attach at three places to prevent neck from leaking. Semco components are recommended for use with other Semco parts only. Más información
  3. PPG Semco 220252 P-Plunger LD Black

    PPG Semco 220252 P-Plunger LD Black

      

    PPG Semco 220252 P-Plunger LD is a regular, precision molded plunger that fits the contour of the cartridge to eliminate waste and maximize dispensing with medium interference. It offers easy insertion, evacuation of trapped air, and clean wiping action. Semco components are recommended for use with other Semco parts only. Más información
  4. PPG Semco 220257 S-Cap Red

    PPG Semco 220257 S-Cap Red

      

    PPG Semco 220257 S Seal is used to fit the threaded end of cartridge to protect and prevent contamination during transportation and storage. Semco components are recommended for use with other Semco parts only. Más información
  5. PPG Semco 220259 Wiper Plunger LD 6-12 oz

    PPG Semco 220259 Wiper Plunger LD 6-12 oz

      

    PPG Semco 220259 Wiper Plunger LD is a precision molded plunger that fits the contour of the cartridge to eliminate waste and maximize dispensing with the highest amount of interference. It provides the most complete wiping action on the cartridge inside diameter. Semco components are recommended for use with other Semco parts only. 6 to 12 oz. Más información
  6. PPG Semco 220260 Wiper Plunger HD

    PPG Semco 220260 Wiper Plunger HD

      

    PPG Semco 220260 Wiper Plunger HD is a precision molded plunger that fits the contour of the cartridge to eliminate waste and maximize dispensing with the highest amount of interference. It provides the most complete wiping action on the cartridge inside diameter. Semco components are recommended for use with other Semco parts only. Más información
  7. PPG Semco 220307 Cartridge without Plunger LD 1 oz

    PPG Semco 220307 Cartridge without Plunger LD 1 oz

      

    PPG Semco 220307 Cartridge without Plunger LD is a disposable, low density, polyethylene cartridge that is used for storage and application of chemical fluids such as adhesives, epoxies, urethanes, acrylics, solder paste, or polysulfides. It can be used with pneumatic and manual dispensing systems. All cartridges have a 1/4 in NPT female thread dispensing orifice. Semco components are recommended for use with other Semco parts only. 1 oz. Más información
  8. PPG Semco 220316 Cartridge without Plunger HD 2.5 oz

    PPG Semco 220316 Cartridge without Plunger HD 2.5 oz

      

    PPG Semco 220316 Cartridge without Plunger HD is a disposable, high density, polyethylene cartridge that is used for storage and application of chemical fluids such as adhesives, epoxies, urethanes, acrylics, solder paste, or polysulfides. It can be used with pneumatic and manual dispensing systems. All cartridges have a 1/4 in NPT female thread dispensing orifice. Semco components are recommended for use with other Semco parts only. 2.5 oz. Más información
  9. PPG Semco 220317 Cartridge without Plunger LD 6 oz

    PPG Semco 220317 Cartridge without Plunger LD 6 oz

      

    PPG Semco 220317 Cartridge without Plunger LD is a disposable, low density, polyethylene cartridge that is used for storage and application of chemical fluids such as adhesives, epoxies, urethanes, acrylics, solder paste, or polysulfides. It can be used with pneumatic and manual dispensing systems. All cartridges have a 1/4 in NPT female thread dispensing orifice. Semco components are recommended for use with other Semco parts only. 6 oz. Más información
  10. PPG Semco 220318 Cartridge without Plunger HD 6 oz

    PPG Semco 220318 Cartridge without Plunger HD 6 oz

      

    PPG Semco 220318 Cartridge without Plunger HD is a disposable, high density, polyethylene cartridge that is used for storage and application of chemical fluids such as adhesives, epoxies, urethanes, acrylics, solder paste, or polysulfides. It can be used with pneumatic and manual dispensing systems. All cartridges have a 1/4 in NPT female thread dispensing orifice. Semco components are recommended for use with other Semco parts only. 6 oz. Más información

Artículos 1 a 10 de un total de 41

por página
Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Establecer Dirección Descendente